3 Minutes to a Better Sourcing Decision
Most procurement headaches come from one thing: the gap between a factory’s catalog and what actually reaches your site.
Think about the last time a “150 lm/W” fixture arrived and tested at 120. Or when the IP65 rating failed after the first rainy season. Or when the supplier blamed the driver, the driver supplier blamed the LED, and you were left with a dark street and an angry city council.
Long lead times, inconsistent quality, missing certifications — they almost always trace back to one root cause: how much of the process is truly in-house.
Does the factory make its own molds, or do they wait 45 days for a third party?
Do they outsource SMT assembly, or run it themselves?
Is the dark room test done on every batch, or just on the pre-shipping sample?
When a manufacturer controls design, die casting, spraying, SMT, assembly, and testing under one roof, you eliminate the finger-pointing. You get consistent quality. You get samples that match production. And you get lead times you can actually trust.
That’s why, instead of giving you another glossy brochure, we want to show you a real production flow — the exact steps that turn raw material into a finished street light that meets ENEC, passes salt spray, and runs 50,000 hours.
Below is the actual process map from a factory in Jiaxing, China. See if you can spot the difference between a true full-line manufacturer and a simple assembler.
AllGreen’s Full In-House Production Line (Jiaxing, China)
Annual capacity: 200,000 units
Annual output value: > USD 8 million
Design → Moulding → Die Casting → Spray Coating → SMT → Assembly → Dark Room → Aging Test
↑ ↓
└─────────────────────── OEM / ODM / CKD / SKD ────────────────────────────┘
Every arrow represents a process we control under one roof.
That means:
No finger-pointing between different subcontractors
Faster samples (your drawing → semi-finished → your sample)
Consistent quality because we test every step
“Shorten the distance from the factory to you” — that’s the whole idea.
What This Means for You as a Buyer
| If you care about… | AllGreen’s advantage |
| On-spec delivery | In-house SMT + integrating sphere test → real lumens, not paper lumens |
| Corrosion resistance (coastal cities) | Our salt spray chamber (IEC 60068-2-11) verifies IP66 before shipping |
| 50,000h L70 life | Thermal shock cycling (−40°C to +50°C) + aging test for every batch |
| European tenders | ENEC certified (less than 30% of CN manufacturers have it) |
| Smart ready | IoT dimming compatible (Modbus / CAN) |
One Simple Spec Table – No Fluff
| Parameter | AllGreen AGSL25 (Premium) |
| Lumen efficacy | 160–170 lm/W |
| IP / surge | IP66 / 6kV line-line, 10kV line-earth |
| L70 lifespan | ≥50,000 hours |
| Warranty | 5 years |
| Certifications | ENEC, CE, RoHS, CB |
Compare: 100W LED = 250W HPS → 60% less electricity.
Beam Type – Get It Right Once
Type III → standard two-lane urban roads
Type IV → wide roads, one-side mounting
Type V → roundabouts, intersections
Our 90° adjustable arm saves 15–20% installation labor.
Short Checklist Before You Sign
Factory owns die casting, SMT, and aging tunnel (yes for AllGreen)
ENEC / ETL if required by your tender
LM-80 + TM-21 report provided
Sample approved before mass production
Why This Short Version Exists
You don’t have time to read 3,000 words.
You need a trustworthy LED street light wholesale supplier that won’t fail after two monsoons.
AllGreen is one of the few Chinese manufacturers that combines:
Full vertical integration (design → aging test)
ENEC certification
200,000 units/year capacity
Real engineering team (10+ years optics & thermal)
Ready to Talk?
Send your road specs (width, pole height, required lux) → we reply with a DIALux simulation and sample lead time.
AllGreen Lighting – Shorten the distance from the factory to you.
Jiaxing, China | OEM | ODM | CKD/SKD
Post time: Jun-05-2026